Low Level Residual Quaternary Ammonium (QAC, Multi Quat) Test Strips, 0-100 ppm [Vial of 100 Strips]

$14.77

Bulk Discounts

Quantity Discount
2+ 5 %
10+ 9 %
25+ 13 %

Description

Determines quaternary concentrations less than 100 ppm in less than one minute

  • Every vial comes with 100 easy to use pre-cut strips
  • Comes in a portable moisture resistant desiccated vial – protecting it from the elements and maximizing shelf life
  • Has easy to use water resistant color chart and instructions printed on bottle
  • Perfect for testing residual Quaternary Ammonia

Check for residual levels of QAC with the Low Level QAC Test strip (Quaternary Ammonium Compounds). This strip is calibrated at 10, 20, 50 and 100ppm. The color block for 10ppm is actually ≤10ppm, but the color change from 0-10 is so insignificant, it’s difficult to see the difference.

Instructions:

  1. Remove one test strip from the vial, being careful not to touch the test pad with your fingers.
  2. Dip the test strip into the solution being tested and move back and forth 5 times, then remove.
  3. Compare the test strip to the color chart after 10 seconds.

To test for residues on surfaces wet the strip’s testing pad with water (distilled if available) & press against the surfaces of fruits, vegetables, cutting boards & utensils, etc. for at least 10 seconds, then compare against the color chart.

Additional information

Weight 1.5 oz
Dimensions 4 × 2.75 × 2.75 in

Reviews